ENGLISH
The speeds are:
-
Speed 0 (off)
-
Speed 1 (low speed)
-
Speed 2 (medium speed)
-
Speed 3 (high speed)
Oscillation function
-
Use the knob to activate the oscillation function (from left to right).
-
Set the knob to the 0-
NOTE: the numbers match the speeds.
Humidifying function
-
Press the humidifying function button
-
If you have installed the ice packs, the air will be cooler after a few minutes.
-
Press the humidifying function button again to deactivate this function.
NOTE: if the water level in the tank does not exceed the "MIN" mark, this function is deactivated.
Before activating it again, fill the tank and wait approximately 30 seconds. Failure to do so
could damage the water pump.
5. CLEANING AND MAINTENANCE
Warning: unplug the appliance when cleaning. Never allow water to wet the control panel.
1. Clean the appliance with neutral soap and a soft cloth.
2. Open the lock on the water tank and remove it, then clean it.
3. Then, put it back in place and lock it.
NOTE: the ice packs and the filter can be washed directly with water. Dry them thoroughly
before replacing them. Fig. 5
Legend Fig. 5
1. Filter
2. Cooling pad
3. Lock
4. Water pump
42
ENERGYSILENCE 2000 SKYCOOL
-
-
position to activate the oscillation function.
to activate it.