EINHELL GE-CM 18/30 Li Manual De Instrucciones Original página 39

manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Operating voltage ......................................... 18 V
Motor speed: ........................................3300 min
Protection type: .............................................IPX1
Protection class:.................................................III
Weight: ........................................................9,3 kg
Cutting width: ..............................................30 cm
Grass basket volume: .............................. 25 liters
Sound pressure level L
Uncertainty K : ........................................ 3 dB(A)
pA
Sound power level L
WA
Uncertainty K : .................................. 2.35 dB(A)
WA
Guaranteed sound power level L
Vibration at the handlebars a
Uncertainty K: ..........................................1.5 m/s
Cutting height adjustment: ......30-70 mm; 3 levels
Lithium-ion battery
Voltage: .................................................. 18 V DC
Capacity: ................................................... 3.0 Ah
Number of cells: ................................................. 5
Battery charger
Input voltage: ......................100-240 V~ 50-60 Hz
Output voltage: ....................................... 20 V DC
Output current: ............................................ 3.0 A
Protection class:............................................II /
Caution!
The equipment and the charger are allowed to
be used only for the lithium-ion batteries of the
Power-X-Change series!
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841.
Wear ear-muff s.
The impact of noise can cause damage to hea-
Anl_SA_GE_CM_18_30_Li.indb 39 Anl_SA_GE_CM_18_30_Li.indb 39
-1
: .................... 77.3 dB(A)
pA
: ........................ 89.3 dB(A)
: ........ 92 dB(A)
WA
: ..............≤ 2.5 m/s
2
h
2
GB
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 62841.
The stated noise emission values were measured
in accordance with a set of standardized criteria
and can be used to compare one power tool with
another.
The stated noise emission values can also be
used to make an initial assessment of exposure.
Warning:
The noise emission levels may vary from the level
specifi ed during actual use, depending on the
way in which the power tool is used, especially
the type of workpiece it is used for.
Limit the operating time!
All stages of the operating cycle must be conside-
red (for example, times in which the electric tools
are switched off and times in which the tool is
switched on but operates without load).
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The fol-
lowing hazards may arise in connection with
the equipment's construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is applied.
- 39 -
28.02.2024 10:52:52 28.02.2024 10:52:52