Dräger X-plore 8000 Instrucciones De Uso página 22

en |
Storage
8 Storage
Store the welding visor fully assembled in a place that is dry
and free of dirt. Protect from direct sunlight and thermal
radiation.
Take out the batteries if storing for extended periods.
9 Disposal
This product must not be disposed of as household
waste. This is indicated by the adjacent icon.
You can return this product to Dräger free of charge. For
information please contact the national marketing
organisations and Dräger.
Batteries must not be disposed of as household waste.
They are therefore marked with the adjacent symbol.
Dispose of batteries and rechargeable batteries at bat-
tery collection centers as specified by the applicable
regulations.
10 Technical data
X-plore 8000 Standard welding visor
Temperature during use
Temperature during stor-
age
Humidity:
Optical class
Darkening stages
Adjustment range for delay
time (dark to light) on the
ADF
ADF darkening time
Dimensions
ADF
Field of vision
Head circumference of
support ring
Weight
Material
Visor shell, covers,
support ring
Face cuff
Sweatband, padding
22
-10 °C to +55 °C
(14 °F to 131 °F)
-20 °C to +70 °C
(-4 °F to 158 °F)
≤ 90 % relative humidity
1/1/1/1
4 (grinding mode), 5 to 8 (cut-
ting mode), 9 to 13 (welding
mode) in accordance with
EN 379
0.1 s to 1.0 s
0.04 ms
133 mm x 114 mm x 9 mm
(5.25" x 4.50" x 0.35")
95 mm x 85 mm
(3.74" x 3.35")
52 cm to 64 cm
approx. 650 g
Polyamide
Flame-resistant cotton
Polyester
Instructions for use
Visor shield, cover
plates
Power supply
X-plore 8000 Premium welding visor
Temperature during use
Temperature during stor-
age
Humidity:
Optical class
Darkening stages
Adjustment range for delay
time (dark to light) on the
ADF
ADF darkening time
Dimensions
ADF
Field of vision
Head circumference of
support ring
Weight
Material
Visor shell, covers,
support ring
Face cuff
Sweatband, padding
Visor shield, cover
plates
Power supply
|
Dräger X-plore 8000 Welding Visor Standard/Premium
Polycarbonate
1 button cell battery, type
CR2450
Solar cell
-10 °C to +55 °C
(14 °F to 131 °F)
-20 °C to +70 °C
(-4 °F to 158 °F)
≤ 90 % relative humidity
1/1/1/1
4 (grinding mode), 5 to 8 (cut-
ting mode), 9 to 13 (welding
mode) in accordance with
EN 379
0.1 s to 1.0 s
0.04 ms
156 mm x 123 mm x 33 mm
(6.14" x 4.84" x 1.30")
107 mm x 75 mm
(4.21" x 2.95")
51 cm to 62 cm
approx. 950 g
Polyamide
Flame-resistant cotton
Polyester
Polycarbonate
2 button cell batteries, type
CR2450
Solar cell