Settings Menu - Solter Aerotig 4320 DC Manual De Instrucciones

SETTINGS MENU

To get in the settings menu, press the MENU button on the control panel. You can exit at any time by pressing the
MENU button again or selecting the "End" option from the internal options.
To scroll through the menu options, turn the main selector and, to select an option, give a short press. To edit the pa-
rameters of the "FNP" submenu, select the parameter with a short press, then turn left or right to select the desired
value. Press the selector to validate the new value. You can select other parameters or return to the settings chart.
The modification of advanced parameters can significantly alter correct operation of the machine. Change
these settings at your own risk. If you notice irregular operation of the machine, reset the parameters to
their default values, or select the "dEF" menu option to return the setting of all operating parameters and
Menu Code
Fnp
End
dEF
ini
rEL
oPt
SOLTER
SOLDADURA S.L.
settings to their respective default values.
Submenu
Advanced setting value of operating parameters.
Some parameters may not be compatible for your model. If this is the
P.01.......P.42
case, the number for these parameters will not be displayed.
See Program Features table for more information.
End Goes up a level.
Returns to main parameters selection screen (settings chart).
Loads default settings in the work area.
Once loading is complete, it automatically returns to the parameter selec-
tion screen.
Loads default settings in the work area. Resets all stored programmes to
factory settings.
Attention! This erases all stored programs.
When the process is complete, it automatically returns to the parameter
selection screen.
Uir Displays the firmware version of the user interface.
Pur Displays the firmware version of the power unit.
CFr Displays the firmware version of the internal configuration.
End Goes up a level.
Displays the working hours (real welding time), in hours and minutes (in
the format hhhh.mm). This timer can not be reset.
Example: 71h 30 minutes
ATTENTION
Description
AEROTIG DC 36