General Descriptions - Solter Aerotig 4320 DC Manual De Instrucciones

GENERAL DESCRIPTIONS

AeroTIG 4320 DC HFP welding machines have been developed especially for TIG welding processes and MMA.
The range of AeroTIG 4320 DC machines is equipped with dual digital signal processor to monitor the status of the
welding arc up to 80000 times per second. Thanks to this technology, the equipment can ensure an accurate and re-
liable arc under all operating conditions.
They can be applied universally to any type of welding of various materials such as stainless steels, alloy steels, alu-
minium alloys or other copper or titanium alloys.
For MMA welding, the machine is equipped with adjustable anti-stick, hot-start and arc-force features. Thanks to
these features, you can weld effectively with any type of coated electrodes.
For TIG welding, the equipment has multiple settings, being particularly suitable for pulsed TIG welding, up to
3000Hz.
On the back of the machine, you will find a nameplate that identifies your unit. This plate is designed in accordance
with the EN 60974-1 standard. Check this nameplate for consumption and/or welding power specifications. Keep the
serial number of your unit in a safe place for future reference.
MEANING OF THE INDICATIONS ON THE SPECIFICATIONS PLATE
EN 60974
S/N....
MMA
TIG
Uo
X
I1 max.
I1 eff.
I2
U2
U1
X ph
50/60 Hz
IP XX
S
SOLTER
SOLDADURA S.L.
International Standard for welding equipment.
Serial number.
MMA welding.
TIG welding.
No-load welding voltage.
Duty Cycle %.
Max. instantaneous absorbed current.
Max. effective absorbed current.
Welding current (Amps).
Test voltage for welding current (I2).
Supplying voltage.
Number of phases to be connected.
Frequency
IP protection class.
Suitable for working in places with increased risks.
AEROTIG DC 24