Eaton TRIPP LITE Serie Manual Del Usuario página 16

2. Closure Installation
2.1 Aerial Installation (Default Installation
Configuration)
The aerial installation accessory is shown in Figure 2-1.
1
Fix the aerial clasps into the slots at the edge of the bottom base (Figure 2-2).
16
04-065-93-47C0_revA.indb 16 04-065-93-47C0_revA.indb 16
Description
A
Quantity
Figure 2-1: Aerial installation accessory
Figure 2-2: Install the clasps
A
Aerial Mounting Hardware
1 Set
1/31/2024 3:43:06 PM 1/31/2024 3:43:06 PM