1. Closure Assembly
6
Wrap the un-vulcanized rubber tape around the cable (Figure 1-7).
7
Run the cable through the cable entry (Figure 1-8).
Note: When bare fiber is used, EVA tube should be used to protect bare fiber. Use insulation
tape to wrap the EVA tube and cable.
A
6
04-065-93-47C0_revA.indb 6
04-065-93-47C0_revA.indb 6
Description
A
Quantity
Figure 1-7: Wrap un-vulcanized rubber tape
Figure 1-8: Run the cable through the cable entry
A
Un-vulcanized Rubber Tape
2 Pcs.
A
Description
Quantity
Insulation Tape
1 Roll
1/31/2024 3:43:05 PM
1/31/2024 3:43:05 PM