Eaton TRIPP LITE Serie Manual Del Usuario página 4

1. Closure Assembly
3
Strip the sheath of the uncut cable for a suitable length ≥4 ft. (1.2 m)
(Figure 1-4).
4
Cut the strength member of the cable from the stripped cable sheath to
2.4 in. (60 mm) to fix the cable (Figure 1-5).
4
04-065-93-47C0_revA.indb 4 04-065-93-47C0_revA.indb 4
protecting sleeve Bare fiber
Bare fiber loose tube
Cable sheath
Figure 1-4: Strip the uncut cable
60 mm
Figure 1-5: Cut the strength member
Bare fiber
Strength member
1/31/2024 3:43:05 PM 1/31/2024 3:43:05 PM