Publicidad
Idiomas disponibles
Idiomas disponibles
TOOLS
1
Camshaft Locking Tool Set, to be used as OEM 303-1605
2
Camshaft VVT Adjustment Tool Set, to be used as OEM 303-1606
3
Crankshaft Setting Pin, to be used as OEM 303-1604
4
Flywheel Locking Tool, to be used as OEM 303-1602, 303-393A, 21-168
5
Tensioning Locking Tool, to be used as OEM 303-1054
6
Crankshaft Pulley Positioning Pin, to be used as OEM 303-732
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
Introduced in 2011, the Ford 1.0 turbo, 3 cylinder, Ecoboost (SCTi) petrol engine is fitted in various
cars and light commercial vehicles across the Ford range. The engine features a wet timing belt (belt
in oil) that runs between the crankshaft and the twin camshaft VVT sprockets. The timing belt is a
conventional arrangement, the exception being that the belt is encased in the engine and runs in oil,
in a similar setup as a chain engine.
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATIONS
● Keep children and other persons away from the working area.
● Do not allow children to play with this tool or its packaging.
● Do not use the tool if parts are missing or damaged.
● Use the tool for the intended purpose only.
● Never place the tool on the vehicle battery. There is a risk of a short circuit.
● Be careful when working on running engines. Loose clothing, tools and other objects can be
caught by rotating parts and cause serious injury.
● Be careful when working on hot engines because of the risk of burn injuries!.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
for Ford 1.0 (3-Zyl.) Ecoboost
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 9072
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
