5
Switching on and off
5.1
Switching on the appliance
Note
The appliance performs an automatic rinse every time it is switched on.
•
Place a vessel below the outlet.
•
Press the ON/OFF button
→ The standby symbol
The appliance performs an automatic rinse and hot water flows out of the
outlet. The standby symbol
The appliance is ready for operation.
5.2
Switching off the appliance
•
Place a vessel below the outlet.
•
Press the ON/OFF button
→ The appliance automatically rinses out the coffee channels once coffee has
been dispensed. The brewing chamber goes into the resting position.
The standby symbol
52
Heft_Lattea_EU_2_3.indd 52
to switch the appliance on.
is flashing. The appliance heats up.
will then be illuminated.
to switch off the appliance.
is not illuminated.
09.04.2014 14:04:18