melitta Caffeo Lattea F300-100 Manual De Instrucciones página 65

→ Press the coffee strength button several times
possible times for the timer.
Display
• Press the ON/OFF button
→ All symbols in the display flash briefly as confirmation. The appliance is
ready for operation, the standby symbol
10.4 Brewing temperature
The brewing temperature is factory-set at level 2 (medium
Prerequisite: The appliance must be ready for operation (see „Switching on
and off" on page 52).
Adjust the brewing temperature as follows to meet your requirements:
• Simultaneously press the button for one-cup dispensing
button for two-cup dispensing
→ The standby symbol
• Press the button for one-cup dispensing
menu for brewing temperature.
→ The symbol for cleaning
• Press the button for coffee strength
possible brewing temperatures.
62
Heft_Lattea_EU_2_3.indd 62
Time
30 minutes
(factory setting)
2 hours
4 hours
8 hours
flashing
to confirm the selected time.
is flashing.
flashes.
to select from four
is illuminated.
).
for more than 2 seconds.
four times to call the
to select between the three
and the
09.04.2014 14:04:21