melitta Caffeo Lattea F300-100 Manual De Instrucciones página 74

7 Add the descaling agent (e.g. Melitta
liquid descaling agent) to the water tank according to the instructions on
the packaging.
Warning!
The descaling agent can cause skin irritations
Comply with the safety instructions and the dosing information specified on the
descaling agent packaging.
8 Reinsert the water tank.
9 Press the button for coffee strength
descaling programme.
→ The integrated descaling programme is started. Water flows inside
the appliance into the drip tray in multiple intervals. This stage lasts
approximately 15 minutes. Subsequently, the symbol for the milk shower
illuminates.
→ Phase 1 is completed.
Phase 2
During Phase 2, two bean symbols
10 Make sure that the coffee grounds container is placed directly under the
milk shower.
11 Turn the rotary switch for the milk shower (Fig. A, no. 11) clockwise to
open the milk shower.
→ Water flows out of the milk shower into the coffee grounds container. The
symbol for the milk shower
Subsequently, the symbol for the drip tray
12 Leave the milk shower open.
13 Empty the drip tray and coffee grounds container.
14 Reinsert the drip tray without the coffee grounds container and place
the coffee grounds container under the milk shower.
→ The symbol for the water tank
Heft_Lattea_EU_2_3.indd 71
ANTI CALC Espresso Machines
®
to continue with the integrated
are shown on the display.
flashes during this process.
illuminates.
illuminates.
71
09.04.2014 14:04:23