SPALDING U-Turn SPA0368 Instrucciones De Montaje página 4

To ensure optimal playability of backboard system, a close tolerance fit between the elevator components and hardware is required.
Test-fit large bolts into large holes of elevator tubes, backboard brackets, and triangle plates. Carefully rock them in a circular motion
Adult Assembly Required. Dispose of ALL packaging materials promptly. As with all products, periodically inspect for loose small parts.
ALL basketball systems, including those used for DISPLAYS, MUST be assembled and installed according to instructions. Failure to
follow instructions could result in SERIOUS INJURY. It is NOT acceptable to devise a makeshift support system.
Cracks in the backboard could result in sudden breakage and result in injury. If your system is equipped with an acrylic
backboard, examine backboard for any damage that may have occurred during shipment. If backboard is damaged in any way
prior to or after assembly, call toll-free number: U.S. 1-800-558-5234; Canada: 1-800-284-8339; http://www.spalding.com
BEFORE YOU START!
to ream out any excess paint from holes if necessary.
Not all items pictured are included with every model.
NOTICE TO ASSEMBLERS
Questions or Missing Parts?
STOP! STOP!
DON'T go back to the store!
Call TOLL-FREE Customer Service
number listed on the front page!
Questions or Missing Parts?
STOP! STOP!
DON'T go back to the store!
Call TOLL-FREE Customer Service
number listed on the front page!
IMPORTANT!
Remove all contents from boxes.
Be sure to check inside pole sections,
hardware and additional parts are packed inside.
WARNING
4