Kübler Ants LES02 Manual De Instrucciones página 43

Kübler Group
The LES02 does not guarantee a response time. A reliable evaluation unit has to react when
position data is missing.
The measuring system and its evaluation unit must meet the requirements mentioned in chapter
Technical Data [} 45].
2.5 Foreseeable Misuse
The product is not suitable for the following applications:
• Under water
• In publicly accessible areas
• In violation of the product specifications.
2.6 Other Applicable Documents
NOTICE
All documents such as the original declarations of conformity or the relevant certificates can be
downloaded from our homepage:
www.kuebler.com/de/docu-finder
For the evaluation of the safe sensor, observe the respective operation manual of the system to
be commissioned. The evaluation unit or control must comply with the requirements of the
interface description and with the safety-related technical specifications.
3 Product Description
3.1 Functional description
The sensor that is mounted on the elevator car and the coded band that is tensioned in the
shaft form together the measuring system. The sensor converts a linear motion into a digital
position signal. To this purpose, it evaluates the band, which is coded by two rows of holes.
3.2 Type plate
Example of a type plate on the product:
Operation Manual R60073.0009 - 03
Technical data
Refer to the data sheets of the corresponding product versions for all
technical data as well as mechanical and electrical characteristics.
For special versions, see the corresponding product offer drawings or
customer drawings.
3 Product Description
EN | 43