Costway TY327802DE Manual De Instrucciones página 5

E Attach the Front Wheels
1. Slide a Φ12 washer onto the front axle.
2. Slide a front normal wheel onto the front axle.
3. Slide a Φ12 washer onto the front axle.
4. Tighten a lock nut to the end of the front axle with a spanner. DO NOT over
tighten.
5. Insert the tabs on the wheel cover into the slots on the wheel. Repeat for
the other front normal wheel.
E Attach the Rear Driving Wheels
08
Cut off the rubber band over the rear gear boxes.
1. Slide a wheel onto the rear axle. Ensure the wheel matches up with the
gear box.
2. Slide another Φ12 washer onto the rear axle.
3. Tighten a lock nut to the end of the rear axle with a spanner.
Repeat the above procedures to assemble the other rear wheel to the
rear axle.
HINT: An extra spanner has been provided to hold the Lock Nut on the
other side of the rear axle while tightening the Lock Nut on the other
side.
4. Insert the tabs on the wheel cover into the grooves on the wheel. Repeat
for the other rear driving wheel.
E
Attach the Handle bar & Front Luggage Carrier
Tools required:
Long nose pliers & screwdriver
3
Turn the vehicle body over.
1. Fit the steering wheel to the end of the steering column.
2-3. Line up the holes on the steering wheel with the holes on the steering
column, and insert the M5x30 machine screw. Fasten a nut on the
opposite end of the screw. Use the long nose pliers to hold the nut while
tightening the screw on the other side with a screwdriver.
4. Fit a luggage carrier to the vehicle body.
5. Tighten three Ø5x12 screws to secure.
1
2
09