LIVARNO LUX LSLR 16 A1 Manual De Instrucciones página 29

Punch the rubber seal on the cable feed (e.g.
with a screwdriver) and then push the prepared
power cable through from behind.
Now screw in the screws (12) to fix the
mounting plate (7) securely to the wall.
Remove the 2 screws and then remove the strain
relief.
Now properly wire the power cable to the
screw terminal (9) on the mounting plate (7).
Note the labelling of the individual terminals.
Please also note the illustration [B] on the cover
page.
If the colour coding of your
connection cable differs from the
illustration opposite, the connection
cable must be tested by an
electrician in order to determine the
assignment of the individual wires.
LIVARNO LUX LSLR 16 A1
Symbol
L
N
Wire
black or brown
yellow/green
blue
English - 27