LIVARNO LUX LSLR 16 A1 Manual De Instrucciones página 30

LIVARNO LUX LSLR 16 A1
Then fix the power cable (10) by fitting the
strain relief with the 2 screws.
Place the LED emitter straight onto the mounting
plate (7). Press the unlock button (8) down and
push the LED emitter towards the wall until the
unlock button (8) slots into the recess in the LED
emitter housing.
Finally, use the Phillips screwdriver to turn the
screw (6) from underneath through the LED
emitter housing into the mounting plate (7).
Switch the power supply back on again.
28 - English