Publicidad
Idiomas disponibles
Idiomas disponibles
Wire feeder
Rolling rack
Pressurizing
handle
Conductive
Conductive
wire output
wire tube
nozzle
Machine
Rolling rack
Pressurizing
handle
Conductive wire
output nozzle
Conductive
wire tube
- Select the appropriate welding wire diameter according to the welding process, and please also note that the selected
diameter shall match with the specifications of the wire feeding roll of the wire feeder, the wire feeding hose in the welding
torch, and the conductive nozzle.
- Lift the wire reel block and move it horizontally.
- Put the welding wire into the axis of wire reel. (the top of welding wire is exposed under the wire reel, and opposite to the
wire feeder)
- Pull the wire reel block back to its original position.
- Raise the pressurizing handle.
- Lift the wire rolling frame.
- Introduce the welding wire into the "conductive wire tube" to make the welding wire align with the wire feed wheel groove,
and then introduce the "conducive wire output nozzle" to press the "wire feeding roller" tightly. (The further wire feeding shall
KEEP WORKiNG
KEEP WORKiNG
Keep Working
Wire feeding
roller
Wire feeding
roller
Wire reel axis
1.2 / 1.6
Rollo de alambre
Eje de soporte
para rollo de alambre
17
S i
9 5 0 0
m P
Wire reel block
Wire reel
Seguro rollo
de alambre
Publicidad
