en - Installation notes
26
Unscrew Torx screws (Torx T 20 and T 30) from the wooden pallet
and remove the wooden battens.
Remove the wooden battens.
Lift the tumble dryer with the pallet truck.
Fit the 4 adjustable feet supplied.
Installing the tumble dryer
Place the tumble dryer on a perfectly level, secure and horizontal
surface that is able to withstand the specified floor load.
The floor load created by the tumble dryer is concentrated and
transferred to the installation surface via the machine feet. A base is
not required. However, an uneven floor surface must be com-
pensated for.