x
y
z
To ensure a sufficient flow of air to the appliance and to facilitate
any future maintenance work, a maintenance corridor with a width
of at least 500 mm must be set up behind the machine and must be
accessible at all times. The distance between the machine and any
walls must not fall below the specified minimum values.
The tumble dryer must be aligned and set up on a level surface. Ad-
just the tumble dryer adjustable feet until the machine is level. After
the machine has been aligned, screw the nuts tightly to the base
plate using a screwdriver.
Tip: Use a spirit level to ensure correct alignment.
en - Installation notes
PDR 51x SL
1800 mm
710 mm
1090 mm
27