EN
48
COMMISSIONING
Before the first use
Before using the device for the first time, the interior of the device and the accessories
must be cleaned.
• Remove all stickers, protective foils and transport protection.
• Remove all accessories and side rails from the interior of the appliance.
• Clean the accessories and side rails carefully with soapy water and a sponge or
soft brush.
• Make sure that there are no packaging materials such as polystyrene granules
inside the unit, as this could cause a fire hazard.
• Wipe the smooth surfaces of the interior and the door with a soft, damp cloth.
• Heat the product while the oven door is closed and while the product is empty, so
that the smell of new product evaporates.
• Ensure that the kitchen is sufficiently well ventilated when the appliance is heated
for the first time. Keep children and pets away from the appliance during this time.
Close the doors to adjacent rooms.
Adjust the settings as follows:
Heating mode
Top and bottom heat
Temperature
250 °C
Time
1 h
After the device has cooled down:
1. Clean the smooth surfaces and the oven door with soapy water and a sponge.
2. Dry all surfaces.
3. Insert the side rails.