Klarstein BALI BREEZE SMART Manual Del Usuario página 61

TROUBLESHOOTING
CAUTION
Risk of electric shock, fire and explosion! Do not repair the air
conditioner by yourself as wrong maintenance may cause electric
shock or fire or explosion. Contact the manufacturer, customer
service or a similarly qualified technician and let the professionals
conduct the maintenance.
Checking the following items in the table below prior to contacting for
maintenance can save your time and money.
Problem
The air conditioner does
not work.
The air conditioner
cannot run after the
immediate start-up
after it is shut
down.
The air conditioner
stops running after it
starts up for a while.
Possible Cause
There might be power
outages.
Power plug may be
loose out from the
socket.
Power switch fuse may
blow.
The time for timing
boot is yet to come.
Safety function
The set temperature
has been reached.
The appliance is in
defrost mode.
The time set in the
timer has elapsed.
Solution
Wait until power is
restored.
The plug in the plug
tightly.
Have the fuse replaced.
Wait or cancel the timer
settings.
If the air conditioner is
turned on immediately
after it is turned off, the
protective delay switch
will delay the operation
for 3 to 5 minutes.
It is a normal function
phenomenon, that the
appliance switches
off when the set
temperature has been
reached.
It will automatically
restore and run again
after defrosting.
If you want to continue
the usage, please turn
the appliance on again.
EN
59