Klarstein BALI BREEZE SMART Manual Del Usuario página 71

Installation of the Indoor Unit
Dimension drawing
Space to the wall
20 cm
Mounting plate
1. The wall for installation of the
indoor unit shall be hard and
firm, so as to prevent vibration.
2. Use the "+" type screw
to fasten the peg board,
horizontally mount the peg
board on the wall, and ensure
the lateral horizontal and
longitudinal vertical.
3. Pull the peg board by hand
after the installation, to
confirm whether it is solid.
Space to the ceiling
15 cm
Space to the floor
Space to the wall
20 cm
EN
69