Before using the first time, wipe all parts of the appliance. Clean the
6 trays ,damper door and slag pans with a lightly moistened cloth.
Use detergent as needed. Don't will host part of the immersion in
water or other liquids!
After cleaning the unit must be run for 30 minutes without placing
any food for drying during this period. Any smoke or smells
produced during this procedure are normal. Please ensure
sufficient ventilation. After the running in period, rinse the racks in
water and dry all parts. This act is only necessary for the first time.
(Don't wash the host part)
Unplug the dehydrator from the power supply and let it cool
down before cleaning. Use a soft brush to remove food sticking.
Dry all parts before storing the dehydrator.
Do not clean the appliance with aggressive chemicals or
abrasives in order not to damage the surface.
Assembling the appliance:
Make sure that the dehydrator sits steadily on a solid,level
surface. Stock the drying trays and connect the plug with a wall
socket. The dehydrator is now ready for use.