Etac R82 Gazelle PS Manual Del Usuario página 14

A
C
B
Knee support
As standard, the Gazelle PS is delivered
with knee supports mounted to be used by
front-standing children. Turn around the knee
supports, to be able to use it for backstanding
children:
1. Loosen the handle (A) to remove the foot
supports.
2. Loosen the handle (B) to remove the
complete knee support unit.
3. Mount the complete knee support unit
on the opposite side and fasten with the
handle.
4. Turn the fitting for the knee support 180o,
by loosening the screws (C) and (D).
5. Loosen the screw (E) and turn around the
knee support, for backstanding children.
Adjust the knee support with the enclosed 6
mm Allen key. Loosen the screws (C) and (D)
and the knee supports are depthadjustable.
By loosening the screw (E) the knee supports
adjust in width and angles. Use the handle (B) to
adjust the height of the complete knee support
unit.
EN
Angling of lower leg
Mount the bar for the lower leg angling on the
abduction bar, as follows:
1. Loosen the handle (A) to remove the
support.
2. Loosen the Allen screw (B) to remove the
knee supports.
3. Mount the knee support on the bar for the
lower leg angling and tighten the handle (A).
4. Mount the foot support on the bar for the
lower leg angling.
Adjust the hight of the lower leg angling by
turning the handle (B) and adjust the angling
by turning the handle (C). To adjust the foot
support see page 15.
A
D
14
B
C
E
etac.com