Etac R82 Gazelle PS Manual Del Usuario página 17

Tray with / without bowl
Loosen the big handles (A) and (B) completely,
and place the tray-mounting in the two tubes
on the back. Fasten the big handles (A) and
(B) again.
Loosen the big handle (A) and the tray-
mounting can be turned through 180 degree's
for either prone or supine use.
Place the tray in the tray-mounting tubes. When
the required position is achieved, fasten the big
handles (C)
Loosen the handles (B) to adjust the height of
the tray. Loosen the handle (A) to adjust the
angle for the tray.
The tray with bowl is delivered with an extra
cover plate, so it can be used as a normal tray.
EN
Side support
Mount the side supports on the trunk support
to give the rightsupport to the upper part of the
body or on the basic plate to support the body
and hips.The side supports are adjustable in
height and in width (A).
A
17
A
B
C
etac.com