Descargar Imprimir esta página

Parkside PDNB 6.3 C3 Traducción De Las Instrucciones Originales página 11

Punzonadora neumática para chapa

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 91
2.8 Noise hazards
Exposure to high noise levels can lead to permanent hearing damage, hearing loss and other problems
such as tinnitus (ringing, buzzing, whistling or buzzing in the ear) if hearing protection is inadequate. It
is essential to carry out a risk assessment in relation to these hazards and implement appropriate control
mechanisms.
Control mechanisms suitable for risk reduction include measures such as the use of insulating materials to
avoid "ringing" noises occurring on the workpieces.
Use hearing protection equipment as required by local occupational health and safety regulations.
The nibblers or shears shall be operated and maintained in accordance with the recommendations con-
tained in this manual to avoid unnecessary increase in noise level.
If the machine is equipped with a silencer, always ensure that it is in place and in working order when the
machine is in operation.
The consumables/machine tools shall be selected, maintained and replaced according to the recommen-
dations in this manual to avoid unnecessary increase in noise level.
2.9 Hazards due to vibrations
Exposure to vibrations can cause damage to the nerves and disturbances in blood circulation in the
hands and arms.
Wear warm clothing when working in cold environments and keep your hands warm and dry.
If you experience numbness, tingling or pain in your fingers or hands, or if the skin on your fingers or
hands turns white, stop using the nibbler or scissors. You should also consult a suitably qualified doctor.
The nibblers or shears must be operated and maintained in accordance with the recommendations
contained in this manual to avoid unnecessary amplification of vibrations.
Hold the machine with a not too firm but secure grip while maintaining the required hand reaction forces,
as the risk of vibration usually increases with increasing grip force.
2.10 Additional safety instructions for pneumatic machines
Compressed air can cause serious injuries:
– When the machine is not in use, before replacing accessories or carrying out repairs, make sure that
the air supply is closed, that the air hose is not under pressure and that the machine is disconnected
from the air supply.
– Never direct the airflow towards yourself or towards other people.
Hoses flapping around can cause serious injuries. Therefore, always check that the hoses and their fas-
teners are undamaged and have not come loose.
Cold air must be drawn away from the hands.
If universal swivel couplings (claw couplings) are used, locking pins must be inserted and hose disconnec-
tion locks must be used to avoid possible connection errors of the hose-hose and hose-unit connection.
Ensure that the maximum pressure indicated on the machine is not exceeded.
Never carry air-powered machines by the hose.
GB/IE/NI/CY/MT
11

Publicidad

loading

Este manual también es adecuado para:

435173 2304