BEGA BETEX AP 921 Manual De Operación página 11

Pump does not achieve full pressure
6. Disposal
6�1 In accordance with statutory regulations
All materials used in the construction of the pumps, etc., must be disposed of legally, or
returned to the supplier.
7. Disclaimer
The manufacturer and/or supplier cannot be held liable for any damage or consequential
damage resulting from incorrect use of the device or damage to workpieces and any
consequential damage resulting from a defect in the device.
© BETEX Tools
1. Too little oil in the reservoir
2. Oil leak in system
3. Internal cylinder leaks
4. Internal leaks or damaged seals.
1. Retract the cylinders and top up
the hydraulic oil.
2. Check the system and repair where
necessary.
3. Replace the leaking cylinders
4. Send the pump for repair.
EN
DE
ES
FR
NL
11