SMA Sunny Boy Storage 3.8-US Instrucciones De Instalación página 19

SMA Solar Technology AG
Symbol Explanation
The product has no galvanic isolation.
UKCA marking
The product complies with the regulations of the applicable laws of England,
Wales and Scotland.
UL 1741 and CSA C22.2 No. 107.1 are the standards applied by Under-
writers Laboratories to the product to certify that it meets the requirements of
the National Electrical Code
IEEE 1547.
4.3 Interfaces and Functions
The inverter can be equipped or retrofitted with the following interfaces and functions:
User interface for configuration and monitoring
The product is equipped as standard with an integrated webserver, which provides a user interface
for configuring and monitoring the product.
Once the connection has been established to the smart device, use a terminal (e.g. smartphone,
tablet or laptop) to connect to the product's user interface using a web browser.
Smart Inverter Screen
The Smart Inverter Screen enables you to view the status display and to display the nominal energy
throughput and state of charge of the battery on the user interface login page. You therefore have
an overview of the most important inverter and battery data without having to log into the user
interface.
The Smart Inverter Screen is deactivated by default. The Smart Inverter Screen can be activated via
the user interface once the inverter has been commissioned.
SMA Speedwire
The product is equipped with SMA Speedwire as standard. SMA Speedwire is a type of
communication based on the Ethernet standard. SMA Speedwire is designed for a data transfer
rate of 100 Mbps and enables optimum communication between Speedwire devices within
systems.
Class 1 wiring methods are to be used for field wiring connection to the terminals of the
communication interface.
SMA Webconnect
The product is equipped with a Webconnect function as standard. The Webconnect function
enables direct data transmission between the product and Internet portals Sunny Portal and
Sunny Places without any additional communication device and for a maximum of 1 products per
visualized system. In PV systems with more than 1 products, there is the option of establishing data
Installation Manual
®
, the Canadian Electrical Code
SBSxx-US-10-IA-xx-14
4 Product Overview
®
and
19