SMA Sunny Boy Storage 3.8-US Instrucciones De Instalación página 27

SMA Solar Technology AG 5 Mounting
Dimensions for mounting:
203 203
(7.99) (7.99)
1 79.2 5 179.25
(7.06) (7.06)
153 153
(6.02) (6.02)
126.75 126.75
(4.99) (4.99)
9 x 16
(0,34 x 0,63)
535
(21.06)
Figure 6 : Position of the anchoring points(Dimensions in mm (in))
Recommended clearances:
To guarantee optimal operation and adequate heat dissipation for the inverter, the following
requirements for clearances should be observed. This will prevent the inverter power output from
being reduced due to excessive temperatures. However, smaller clearances are permitted without
causing any risk.
Installation Manual SBSxx-US-10-IA-xx-14 27