SMA Sunny Boy Storage 3.8-US Instrucciones De Instalación página 68

9 Decommissioning the Inverter
16. Lead the enclosure lid to the Connection Unit and
plug the ribbon cable into the socket on the
communication assembly.
17. Ensure that the ribbon cable is securely plugged into the sockets at both ends.
18. Position the enclosure lid of the Connection Unit on the enclosure and tighten all 6 screws
crosswise (TX 25, torque: 3 Nm ± 0.3 Nm (26.55 in-lb ± 2.65 in-lb)).
19. If the inverter is secured against theft with a padlock, open the padlock and remove it from the
inverter.
20. If the inverter is to be stored or shipped, pack the inverter. Use the original packaging or
packaging that is suitable for the weight and dimensions of the inverter and secure the
packaging with tension belts, if necessary.
21. Dispose of the inverter in accordance with the locally applicable disposal regulations for
electronic waste.
68 SBSxx-US-10-IA-xx-14
SMA Solar Technology AG
COM
M1 M2
X1 X2
ANT.
FCC ID: SVF-KP20
IC: 9440A-KP20
A B D-IN SPS
Installation Manual
AC-out SPS