Transition Styles And Dves; Controlling Audio - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

Ocultar thumbs Ver también para ATEM Mini:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 447
2
Now press a duration you want for the mix.
3
Press the 'auto' button to tell ATEM Mini you want to use an automated transition.
4
Press the input 2 button to perform the mix transition.
You will now see inputs 1 and 2 buttons illuminated red while the transition happens and your
broadcast changes to input 2. When the transition is complete, input 2 will be illuminated red
to indicate it is now live on air.

Transition Styles and DVEs

The buttons above the 'auto' button contain different transition styles, including a mix cross
dissolve and a dip to color.
You can also select horizontal and vertical wipe transitions by pressing their respective
transition style buttons. These also include DVE push and squeeze transitions.
Press the transition type button for the transition you
want to use, for example a horizontal or vertical wipe,
push or squeeze DVE transition, and mix or dip transition

Controlling Audio

When setting up your production or during your broadast, you will likely want to control audio
levels if the sound is too quiet or too loud.
When an audio level is too loud it will clip. Clipping means the audio has increased beyond the
maximum accepted level and when this happens it can distort and sound unpleasant.
Switching your Production
11

Publicidad

Tabla de contenido
loading

Tabla de contenido