Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento página 44

4 Click on the create macro button, which is labeled with a 'plus' icon, to open the create
macro popup window.
If you want to, you can enter the name of your macro and type a description. This lets
you easily keep track of your macros and quickly see what each macro does. When you
click on a macro, your notes will appear in the status window.
To start recording a macro, select a macro
slot, then click on the create macro button.
Type in your notes and click 'record'.
5 Click the 'record' button.
The popup window will close and a red border will appear around your ATEM Software
Control panel indicating your macro is now recording. Notice the red 'add pause' button
at the top of the border.
Now that your macro is recording, you can start performing your switcher actions.
While recording, the create macro button
will change to a 'record' button. When you
have completed your switcher actions, click
on the 'record' button to stop recording.
6 Click on the bars button in the program panel on the switcher page. This sets bars to
your switcher's program output.
7 Select color 1 on the preview output.
8 Open the transitions palette and set it to mix.
If mix is already selected, make sure your macro records the setting by selecting a
different transition type, for example the wipe transition, then clicking on mix again.
9 Now change the transition Rate to 3:00. This sets the mix transition duration to
3 seconds.
Using Macros 44