General Settings; Setting Audio Input And Output Behaviour - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

General Settings

Setting the Switcher Video Standard
The video setting is used to select the operating video standard of your ATEM Mini. The video
standard is set automatically when you plug in the first HDMI source, however if you ever need
to change the video standard you can use this setting to do that. All video sources will then be
converted to match the set video standard.
If you want to return ATEM Mini to automatically detect the first connected video format, select
'auto mode'.
Set video standard
ATEM Mini Supported Video Standards
To set the video standard, select the format you want to use from the 'set video standard to'
drop down menu, and then click on the set button. Any time the video standard is changed, the
switcher will remove any stills you have loaded into the media pool, so it's best to set the video
standard before loading any media.
1080p59.94
1080p50
1080p29.97
1080p25
1080p24
1080p23.98
1080i59.94
1080i50
720p59.94
720p50

Setting Audio Input and Output Behaviour

The 'audio' tab lets you control the nature of the audio follow video feature plus set the mic
inputs to mic or line level audio. Microphones typically have weaker signals compared to line
outputs from other audio devices. This means when mic is selected, the input is boosted
slightly to compensate. This also means that if mic is accidentally selected when a line level
input is plugged in, the audio will sound unusually loud. If the audio sounds much louder than it
should be, check that line is selected instead of mic.
Changing Switcher Settings 49