Re-Connecting To The Network; Checking System Name; Selecting Another Server - Sony NAS-CZ1 Manual De Instrucciones

To return to the default setting
1
Select "NETWORK SETUP?" in the network
menu (page 19), then press ENTER.
2
Press . or > repeatedly until
"NETWORK TYPE" appears, then press
ENTER.
3
Press . or > repeatedly until "DHCP?"
appears, then press ENTER.
4
Press . or > repeatedly until
"CONNECT?" appears, then press ENTER.
"Configuring" flashes, then the system
returns to automatic setting.
Re-connecting to the
network
Select "CONNECT?" in the network menu
(page 19), then press ENTER.
"Configuring starts flashing".
Re-connecting to the network is complete.

Checking system name

Select "MY NAME" in the network menu
(page 19), then press ENTER.
The system name appears.
Note
You can check the system name only when using
M-crew Server.

Selecting another server

1
Select "MEDIA SERVERS?" in the
network menu (page 19), then press
ENTER.
2
Press . or > repeatedly to select
the desired media server, then press
ENTER.
Note
You can select the server from up to 10 servers.
GB
21