Operating And Adjusting; Safety-Relevant Information; Desktop Height Adjustment; Variants Lift 1 And Lift 2 - Steelcase Flex Collection Desk Instrucciones De Uso

_______________________________________________________________
5 Operating and
adjusting

5.1 Safety-relevant information

The Flex Height-Adjustable Desk should only be
used and operated in faultless condition and in
compliance with the instructions in the operating
manual.
Before changing the height of the desk, ensure that:
■ The desktop is level. If the floor is uneven, align
the desktop via the adjusting wheel on the feet.
■ That no persons or objects (e.g. open doors or
windows) are in the lifting range, or protrude
into the lifting range.
■ No one is on the desk.
■ The maximum permissible load-carrying capacity
of the desk is not exceeded.
Danger due to voltage!
Contact with voltage can cause severe
EN
injury or death due to electric shock!
 Attach or detach
connectors only when the
equipment is de-
energised.
Do not open the housings

of the following
components:
Controller
–
Columns
–
Control panel
–
Danger due to voltage!
The metal parts of the desk
can become energised if live
cables and connections are
damaged.
Do not earth electrical devices on the

desk frame.
12

Operating and adjusting

Risk of injury or damage!
 When loading the CPU holder with
weight that is higher than the approved
weight, the fastening screws can tear.
Risk of injury or damage!
The fastening screws could tear if the desk
is lifted by the desktop or the attached
components.
 Always take hold of the desk at the
underframe to transport or move it.
Ensure that the connecting cables of all
devices on the desk are long enough.
Optimum desktop height
The adjustment to the optimum desktop height
(sitting height) is crucial for the correct sitting
posture at the workstation. The correct desktop
height setting for the workstation can be found in the
workstation analysis (pursuant to the German
Occupational Safety and Health Act, the German VDU
Ordinance, or accident prevention regulations, for
example). See also BGI 650: Screen and office
workstations. Design guidelines.

5.2 Desktop height adjustment

Height adjustment of the Flex Height-Adjustable
Desk occurs via electric motor for all variants.
Lift 1
5.2.1 Variants
The electric motor enables variable vertical desk
adjustment to between 720 mm and 1200 mm (Lift 1
variant) or to between 650 mm und 1250 mm (Lift 2
variant).
Make sure before first use that
■ the desk has been assembled correctly;
■ the controller is connected to the motor by cable;
■ the control panel is connected to the controller;
■ all safety-relevant information has been followed.
Lift 2
and
156631