Selecting The Waveband/Memory Bank; Tuning Into A Station; Setting The Sensitivity Of Station Seek Tuning - Blaupunkt Bahamas MP46 Instrucciones De Manejo

Radio mode
Selecting the waveband/memory
bank
This device can receive programmes
broadcast over the FM and AM frequency
ranges. There are three memory banks
available for the FM waveband (FM1, FM2
and FMT) and one for the AM waveband.
Six stations can be stored in each memory
bank.
To switch between the memory banks FM1,
FM2 and FMT and the AM waveband,
u Briefl y press the BND•TS button 6.

Tuning into a station

There are various ways of tuning into a
station.
Automatic station seek tuning
u
Press the or
The radio tunes into the next receivable
station.
Tuning into stations manually
You can also tune into stations manually.
To change the set frequency in small incre-
ments,
u
Briefl y press the
To change the set frequency quickly,
u
Press and hold down the
: for a longer period of time.
12
button :.
or button :.
or button
Setting the sensitivity of station
seek tuning
You can choose whether the radio should
only tune into stations providing good re-
ception or whether it can also tune into tho-
se with a weak reception.
u Press the MENU button 9.
u
or
Press the
ly until "TUNER MENU" appears on the
display.
button : to open the
u
Press the
menu.
u
Press the or
until "SENS HI" or "SENS LO" appears
on the display.
"SENS HI"means a high sensitivity setting
and "SENS LO"means a low sensitivity set-
ting.
u
Set the desired sensitivity level using
or button :.
the
When you have fi nished making your
changes,
u Press the MENU button 9 twice.
Note:
The device will store the sensitivity set-
ting selected in FM and AM waveband.
button : repeated-
button : repeatedly