Designated Use - Abicor Binzel ABIROB A Serie Instructivo De Servicio

®
ABIROB A
1 Identification
1.1 CE marking
2 Safety

2.1 Designated use

®
The ABIROB A welding torch system is used in industry and in the trade for
shielding gas welding using inert (MIG) or active (MAG) gases. This version is
air cooled and can be used in all welding positions. These operating
instructions only describe the ABIROB
torch system may only be operated with original ABICOR BINZEL spare
parts.
This device fulfils the requirements of the relevant EU directives.
Conformity is confirmed by the CE marking on the device.
The enclosed safety instructions must be observed.
• The device described in these instructions may be used only for the
purpose and in the manner described in these instructions. In doing so,
observe the operating, maintenance and servicing conditions.
• Any other use is considered improper.
• Unauthorised modifications or changes to enhance the performance are
not permitted.
1 Identification
®
A welding torch system. The welding
EN - 3