9 Maintenance and cleaning
9.1 Cleaning the wire guide
9.2 Shortening the spiral liner
EN - 18
1 Unscrew the cable assembly on the machine side and lay it out in a
stretched position.
2 Unscrew the nut and pull out the spiral liner or PA liner.
WARNING
Risk of injury
Serious injuries may be caused by parts swirling around.
• When cleaning the wire guide with compressed air, wear suitable
protective clothing, in particular safety goggles.
3 Clean the wire conduit from both sides with compressed air.
4 Slide the adjusted spiral liner or PA liner into the wire conduit and secure
with a nut.
NOTICE
• New and still unused spiral liners or PA liners have to be shortened to the
actual length of the cable assembly.
• The PA liner is attached in a similar way to the spiral liner. For more
information, please see the wire feeder manufacturer's operating
instructions.
• PA liners are used for aluminium. PA liners and attachment materials are
available on request.
®
ABIROB
A