Sime DEWY EQUIPE 360 BOX Manual De Uso página 73

2.7. 1 Adjustable brackets for
fastening exhaust manifolds
Exhaust manifolds can be fastened with
two types of brackets, which can be adju-
sted in height, must be ordered separately
and ar e supplied wit h t he necessar y
instructions:
- Kit with adjustable brackets for ø 160
exhaust manifolds, code 8102516
- Kit with adjustable brackets for ø 200
exhaust manifolds, code 8102517.
For information on the assembly and num-
ber of brackets required for each module,
see figure 6/e.
2.8 SAFETY KIT
Safety kit assembly is mandatory.
According to module fixture positions, kit
code 8101510 can be requested for left
side installations and kit cod. 8101511 for
right side installations.
The kit is made up of the following compo-
nents (fig. 7):
– System supply flanged section:
Code 6291963 for left-hand fixtures
Code 6291964 for right-hand fixtures
– System return flanged section code
6291965
– Gaskets, nuts and fastening screws M16
– Thermomet er 0-120° C 1/2" code
6146004
– 3.5 BAR safety valve code 6042203
and drain funnel code 6269402
– Safety thermostat 100°C manual reset
code 6001409
– 4 BAR 1/4" water pressure switch code
6037550
– 0-6 BAR 1/4" pressure gauge code
6217050, tap code 6216606 and lock
code 6216650
– Expansion vessel 8 liters code 6245108,
connection pipe code 6227661, gaskets
and nipple.
WARNING: In models "60-120-180-240
BOX/P60-P120 BOX" the safety kit can
be inserted in a specific protective case
cod. 8101512 supplied separately.
In models "300-360 BOX" safety valve
code 6042203 and exhaust funnel code
6269402 must be replaced with those in
the safety valve kit code 8103825 to be
requested separately.
Model Number of brackets required
code 8102516
120-P120 BOX n. 2
180 BOX n. 3
240 BOX n. 3
300 BOX n. 3
360 BOX n. 3
Capillar y assembly of fuel
on/of f valve calibrated to
98°C, not supplied.
IT
ES
GB
code 8102517
-
-
-
n. 1
n. 1
Fig. 6/e
Fig. 7
73