Sime DEWY EQUIPE 360 BOX Manual De Uso página 84

IT
ES
"DEWY EQUIPE 60 BOX/P60 BOX"
SINGLE MODULE MALFUNCTIONS
GB
– Ignition lock (fig. 3)
If the burner does not light the red led ( )
turns on. To attempt ignition again, rotate
the selector knob to ( ) and release it
immediately after returning it to winter
operations ( ).
If it locks again, request an authorised
service control.
– Insufficient water pressure (fig. 4)
If the "0.5 bar" red light blinks, the
module does not work. To restore opera-
tions, fill the system until the green "1
bar" led turns on. If all leds are of f,
request an authorised service call.
– Safety/exhaust thermostat
triggered (fig. 5)
If the safety/exhaust thermostat trig-
gers the red "35°C" led blinks.
To attempt ignition again, rotate the
selector knob to ( ) and release it imme-
diately after returning it to winter opera-
tions ( ).
If it locks again, request an authorised
service control.
– Other faults (fig. 6)
When one of the red "40÷80°C" leds
blinks, turn off the generator and attempt
ignition again.
This operation can be repeated 2-3 times
at most, in the event of failure, request an
authorised service call.
"DEWY EQUIPE 60-120-180-240-300-360 BOX/P60-P120 BOX"
ALL "DEWY EQUIPE 60-120-180-240-300-360 BOX/P60-P120 BOX" HEAT MODULE
FUNCTIONS CAN BE MANAGED FROM THE RVA 47.320 REGULATOR EQUIPPED WITH
USE INSTRUCTIONS MANUAL.
WARNING: WHEN THESE MODULES ARE CONNECTED TO THE RVA 47.320 REGULATOR,
THE "CR/OFF/INV/RELEASE SELECTOR MUST BE POSITIONED AS INDICATED IN FIG. 7.
84
SPIA ROSSA
RED LIGHT
BLINKING RED LIGHT SPIA ROSSA INTERMITTENTE
IN CONDIZIONE DI SICUREZZA
IN SAFETY CONDITIONS
GREEN LIGHT SPIA VERDE IN CONDIZIONE
DI FUNZIONAMENTO
IN OPERATING CONDITIONS
BLINKING RED LIGHT
SPIA ROSSA INTERMITTENTE
SPIA ROSSA INTERMITTENTE
BLINKING RED LIGHT
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7