Abicor Binzel TCS-FP Manual De Instrucciones página 32

EN Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes and amendments to these
operating instructions as become necessary due to misprints, inaccuracies or product enhancements. Such changes will,
however, be incorporated into subsequent editions of the operating instructions.
All brand names and trademarks that appear in these operating instructions are the property of their respective owners/
manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national subsidiaries and partners
worldwide can be found on our website at www.binzel-abicor.com
1 Identification
1.1 Marking
1.2 EU Declaration of Conformity
2 Safety
2.1 Designated use
2.2 Obligations of the operator
2.3 Personal protective equipment (PPE)
2.4 Classification of the warnings
2.5 Warning and notice signs
2.6 Emergency information
3 Product description
3.1 Technical data
3.2 Abbreviations
3.3 Nameplate
3.4 Signs and symbols used
4 Scope of delivery
4.1 Accessories/options
4.2 Transport
4.3 Storage
5 Functional description
6 Commissioning
6.1 Transport and installation
6.2 Setup
6.2.1 Installing the torch cleaning station
6.2.2 Establishing the electrical connection
6.2.3 Connections
6.3 Connecting the pneumatic system
6.4 Compressed air connection
6.5 Electrical connection
6.6 Injection unit
6.6.1 Replacing the rubber seal of the cover
on the injection unit
6.6.2 Adjusting the anti-spatter fluid
6.6.3 Wire cutter (DAV)
6.6.4 Fixing the set of clamping jaws
6.6.5 Mounting the reamer
6.6.6 Setting up the pneumatic motor
6.6.7 Robot programming to approach the
clamping position
6.6.8 TCS-FP microcontroller PCB
EN - 2
EN-3 7 Operation
EN-3
EN-3 8 Decommissioning
EN-6 9 Maintenance and cleaning
EN-6 9.1 Maintenance intervals
EN-6 9.2 Replacing the DAV cutter
EN-6
EN-6 10 Troubleshooting
EN-7 10.1 Cleaning unit
EN-7 10.2 Injection unit
10.3 Wire cutter (DAV)
EN-7
EN-8 11 Disassembly
EN-9
EN-10 12 Disposal
EN-10 12.1 Materials
12.2 Consumables
EN-10 12.3 Packaging
EN-10
EN-11 13 Appendix
EN-11 13.1 Pneumatic Plan
13.2 Circuit diagram
EN-11 13.3 Flow chart
EN-11
EN-12
EN-13
EN-13
EN-13
EN-13
EN-13
EN-13
EN-14
EN-14
EN-15
EN-16
EN-18
EN-19
EN-19
EN-19
EN-21
EN-22
TCS-FP
EN-23
EN-23
EN-24
EN-24
EN-25
EN-25
EN-25
EN-26
EN-26
EN-27
EN-27
EN-27
EN-27
EN-27
EN-28
EN-28
EN-29
EN-30
BAL.0713.0 • 2019-02-11