Specifications - Stihl SR 200 Manual De Instrucciones

English
Definitions
1. Container Cap
For closing the container.
2. Container
Contains the material to be sprayed.
3. Muffler with Spark Arresting Screen
Muffler reduces engine exhaust
noises and diverts exhaust gases
away from operator.
Spark arresting screen is designed
to reduce the risk of fire.
4. Starter Grip
The grip of the pull starter, for
starting the engine.
5. Spark Plug Boot
Connects the spark plug with the
ignition lead.
6. Manual Fuel Pump
Provides additional fuel feed for a
cold start.
7. Carburetor Adjusting Screws
For tuning the carburetor.
8. Choke Knob
Eases engine starting by enriching
mixture.
9. Air Filter
Prevents dust and foreign matter
from entering the carburetor.
10. Fuel Filler Cap
For closing the fuel tank.
11. Fuel Tank
For fuel and oil mixture.
12. Baffle Screen
To vary the direction and shape of
the spray.
32
13. Metering Knob
For varying the spraying rate.
14. Nozzle
Mounted on blower tube, directs
airstream.
15. Blower Tube
Directs the airstream.
16. Throttle Trigger
Controls the speed of the engine.
17. Setting Lever
For run and stop. Sets the throttle to
various positions or stops the
engine.
18. Valve Lever for Solution Feed
Opens and closes spray liquid hose.
19. Throttle Trigger Lockout
Must be depressed before the
throttle trigger can be activated.
20. Pleated Hose
For blowing in the desired direction.
21. Back Padding
Increases carrying comfort.
22. Harness
For carrying the unit.
23. Backplate
Helps protect the back of the user.
24. Spacer
Designed to reduce the risk of burns
and fire.

Specifications

EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
A = 300 hours
B = 125 hours
C = 50 hours
CARB
The Emission Compliance Period used
on the CARB-Air Index Label indicates
the terms:
Extended = 300 hours
Intermediate = 125 hours
Moderate = 50 hours
Engine
Single cylinder two-stroke engine
Displacement: 1.66 cu. in
(27.2 cc)
Bore: 1.34 in (34 mm)
Stroke: 1.18 in (30 mm)
Engine power to 0.8 kW
ISO 7293: (1.10 bhp)
Idle speed: 2,500 rpm
SR 200