Starting / Stopping The Engine - Stihl SR 200 Manual De Instrucciones

a
a 1/3 throttle
b 2/3 throttle
To disengage the travel limiter,
return the setting lever (1) to the run
N
position F.
SR 200
Starting / Stopping the
Engine
b
Before Starting
Close valve lever (1) for solution
N
feed.
Start the engine.
Observe safety precautions.
N
NOTICE
Start your unit on a clean, dust-free
surface only to ensure that no dust is
sucked in.
The setting lever must be on F
N
1
Press the manual fuel pump bulb at
N
least five times – even if the bulb is
filled with fuel.
Cold Engine (cold start)
Turn the choke knob to g.
N
Warm Engine (warm start)
Turn the choke knob to <.
N
Also use this setting if the engine has
been running but is still cold.
English
17