Guide To Using This Manual; Safety Precautions And Working Techniques - Stihl SR 200 Manual De Instrucciones

English

Guide to Using this Manual

Pictograms
The meanings of the pictograms
attached to or embossed on the
machine are explained in this manual.
Depending on the model concerned, the
following pictograms may be on your
machine.
Fuel tank for gasoline
and engine oil mixture
Press to operate manual
fuel pump
Flow control
Symbols in Text
Many operating and safety instructions
are supported by illustrations.
The individual steps or procedures
described in the manual may be marked
in different ways:
A bullet marks a step or procedure.
N
A description of a step or procedure that
refers directly to an illustration may
contain item numbers that appear in the
illustration. Example:
Loosen the screw (1).
N
2
Lever (2) ...
N
In addition to the operating instructions,
this manual may contain paragraphs
that require your special attention. Such
paragraphs are marked with the
symbols and signal words described
below:
DANGER
Indicates a hazardous situation that, if
not avoided, will result in death or
serious injury.
WARNING
Indicates a hazardous situation that, if
not avoided, could result in death or
serious injury.
NOTICE
Indicates a risk of property damage,
including damage to the machine or its
individual components.
Engineering Improvements
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improvements
are made from time to time. Therefore,
some changes, modifications and
improvements may not be covered in
this manual. If the operating
characteristics or the appearance of
your machine differs from those
described in this manual, please contact
your STIHL dealer or the STIHL
distributor for your area for assistance.
Safety Precautions and
Working Techniques
Because the mistblower
is a power tool for spray-
ing chemicals, special
safety precautions must
be observed to reduce
the risk of personal injury.
It is important that you
read, fully understand
and observe the following
general safety precau-
tions and warnings. Read
the instruction manual
and the safety precau-
tions periodically. In
addition, read and follow
the chemical manufac-
turer's instructions for the
chemical products being
applied. Since such prod-
ucts may vary greatly in
handling/application
requirements and risks,
the product label is nor-
mally your best guide for
safe and effective use.
Use your power tool for spraying
chemicals and other liquids to control
pests and weeds in fruit, flower and
vegetable gardens, on trees and bushes
and on other plants, such as coffee,
tobacco and cotton. It is also useful in
the maintenance of young trees for, e.g.,
controlling the bark beetle and other
pests and plant diseases.
Only use plant protection products that
are specifically approved for use in
sprayers/mistblowers by their
SR 200