Starting / Stopping The Engine - Stihl FS 38 Manual De Instrucciones

Starting / Stopping the
Engine
Controls
7 1 6
3
5 4
1 Stop switch
2 Throttle trigger lockout
3 Throttle trigger
4 Tongue of throttle trigger
5 Catch
Positions of stop switch
6 I – normal run position – the engine
is running or can start
7 0 – Stop – engine off – the ignition is
switched off
FS 38
Starting
2
Move the stop switch to I.
N
Press down the throttle trigger
N
lockout and hold it there.
Squeeze the throttle trigger until the
N
catch on the tongue (4) can be
engaged on the housing (arrow).
Now release the throttle trigger,
N
tongue and trigger lockout in that
order. This is the starting throttle
position.
4
N
g if the engine is cold
e for warm start – also use this posi -
N
9
8
Set the choke lever (8) to
tion if the engine has been running
but is still cold.
Press the manual fuel pump
bulb (9) at least five times – even if
the bulb is filled with fuel.
English
21