Starting / Stopping The Engine - Stihl FS 565 Manual De Instrucciones

N Loosen the screw (3).
Floating position
N Mowing heads and grass cutting
blades should just touch the ground.
Proceed as follows to adjust the floating
position:
N Move the carrying ring up or down
the drive tube – tighten the screw
moderately – let the unit go and wait
until is its balanced – then check the
floating position.
FS 56, FS 56 R, FS 56 C, FS 56 RC
When the correct floating position has
been reached:
N
Tighten down the screw on the
carrying ring firmly.
Detaching unit from harness
1
2
N Press down the bar on the
carabiner (1) and pull the carrying
ring (2) out of the carabiner.
Starting / Stopping the
Engine
Controls
Version with bike handle
1
2
1 Throttle trigger interlock
2 Throttle trigger
3 Momentary stop switch with Run
and 0 = Stop positions.
English
3
2
1
27