Stihl SP 200 Manual De Instrucciones página 23

English / USA
: Swing the hook so that its side is
parallel to the ground.
: Place the unit on the ground: It must
rest securely on the engine support
and the gearbox. Check that the
hook is not touching the ground or
any other obstacles.
: Make sure you have a firm footing.
: Hold the unit with your left hand and
press it down firmly – your thumb
should be under the fan housing.
22
: Pull the starter grip slowly with your
right hand until you feel it engage
and then give it a brisk strong pull.
Do not pull out the starter rope all
the way – it might otherwise break.
: Do not let the starter grip snap back.
Guide it slowly into the housing so
that the starter rope can rewind
properly.
: Continue cranking until engine fires.
When the engine begins to fire
: Turn the choke knob to e
: Continue cranking.
As soon as engine runs
: Blip the throttle trigger immediately
– the slide control moves to the run
position # and the engine settles
down to idle speed.
Make sure the carburetor is
correctly adjusted – the hook must
not move when the engine is idling.
Your machine is now ready for
operation.
To shut down the engine
: Push the slide control to STOP-O.
At very low outside temperatures
As soon as engine runs:
: Blip the throttle trigger to disengage
the starting throttle positiion –
the slide control moves to the run
position # – and the engine settles
down to idle speed.
: Open the throttle part way and warm
up engine for a brief period.
SP 200