Analyzing Memory Messages - Beurer PM 62 Manual De Instrucciones

The monitor automatically switches to the main
display.

10.6 Analyzing memory messages

In the menu
Training
memory is almost full or if almost all the laps are occupied.
Message
If the memory is full, you cannot start a new training session. Read
in the previous section "10.5 Delete all recordings" to find out how to
delete the memory manually.
The memory is also deleted every time the data is transferred to the
PC. You can find the relevant explanations in the chapter "13 EasyFit
Software".
your HR watch automatically informs you if the
Meaning
When switching to the menu
pressing the
signals
MEM LOW
memory or less than 10 laps are free.
During training, the HR watch signals every 5
seconds
MEM x% Free
memory is free.
E. g. on the display:
free).
During training the HR watch signals every 5
seconds
LAP Rest x
(of a total of 100) laps .
E. g. on the display:
free).
32
MENU button the HR watch
, if less than 10% of the
, if less than 10% of the
MEM 8% Free
, if there are less than 10
LAP Rest 7
by
Training
(still 8%
(still 7 laps