Eshift With Rohloff E-14 Speedhub - Bosch eShift Shimano Nexus Di2 Manual Original

OBJ_BUCH-3117-001.book Page 6 Thursday, June 22, 2017 3:14 PM
English–6

eShift with Rohloff E-14 Speedhub 500/14

Always use the Speedhub gearstick to shift gears with the
Rohloff Speedhub 500/14.
eShift with the Intuvia on-board computer
The engaged gear will be shown briefly on the display when-
ever the gear of the gear hub is shifted.
The drive unit recognises the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to a
set "Start gear". The "Start gear" can be set in the basic set-
tings menu.
Intuvia eShift basic settings menu
You can choose from the following additional basic settings:
– ...
– "– Start gear +": The starting gear can be set here. In the
"––" position, the automatic function for shifting down a
gear is switched off. This menu item is displayed only when
the on-board computer is in the holder.
eShift with the Nyon on-board computer
The gear is always displayed in the eShift field. The gear is
displayed briefly during a gear shift only when the eShift field
is not visible (e.g. in settings).
The drive unit recognises the gear shift and briefly reduces
the motor assistance level as a result of it, which means the
gear can also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to a
set "Start gear". The "Start gear" can be set under
"My eBike" > "eShift".
0 275 007 XES | (22.6.17)
Keeping the gearstick pushed down causes the system to
keep shifting gear in increments of three after the first gear
change, until the lowest or highest gear is reached.
– ...
– "Gear vx.x.x.x": This is the software version of the
variable speed transmission. This menu item is displayed
only when the on-board computer is in the holder. This
menu item is only displayed in conjunction with an elec-
tronic variable speed transmission.
– ...
Intuvia eShift function displays
You can choose from the following additional functions in the
function display (combination of text display and value
display):
– ...
– "Gear": The currently engaged gear is shown on the
display. The newly engaged gear is briefly shown on the
display each time the gear is changed.
– ...
Bosch eBike Systems